Too big for an edge, but small for a jug!
The mini jugs are positive slightly juggy holds ideal for warm ups.
You can't sink your hand into them but they're still pretty friendly!
Cut to suit the angle of your board.
Available in sets of 6 and 10
When installing, use only 5mm screws for the 5mm fixing option, and M10 bolts for the bolted option.
Be careful not to overtighten as especially on the smaller holds there is the possibility of overtightening the hold and splitting it. This risk is greatly reduced on the holds with brass cups which is why these are usually included on the smaller holds. If possible, tighten by hand, especially for smaller holds, and if you use a powered driver, be slow and gentle!